Frequently bought together:
Description
The 3DFX Ultra Booster takes your fan's cooling potential to another level!! Plug it inline from your receiver to your fan and watch your motor temps drop and end of race lap times improve.
Ultra Booster Lenghts:
- Super Short - 25mm/35mm (TC, 4wd Off-Road)
- Short - 25m/70mm (Prodigy Tray Mount Fans)
- Medium - 25mm/130mm (2wd, Truck Off-Road)
- Long - 60mm/130mm (Prodigy Rear Pod Mounted Fans)
WARNING - Using BEC setting of 6.0v will not power the Booster to full capability. It is recommended to set the speed control BEC setting to 7.4v. Lower BEC values (6.4v minimum) will provide high output to the fan but will result in much shortened life of the booster.
Warranty Information
WARNING: These are 3D Printed. 3D printed parts and tools are not typically as durable as aluminum or injection molded items. Excessive force can make 3D printed items fail. Use with care!! Electronic internals are tested prior to and after assembly. There is NO reverse polarity protection.
View AllClose